The ContiVanContact™ 200 is a transporter specialist that has been designed for use in Western and Central Europe. With its sipes in the center of the tread and its grooves, it delivers safety even when driving and braking on rain-soaked roads. Its macro block profile and sturdy tread center deliver precise handling even under heavy loads – on top of which the tire also helps to save fuel thanks to a 15% reduction in rolling resistance (in comparison to the predecessor model). Straight away from the start of production, Continental will produce ten sizes that are suitable for rim diameters ranging from 15 to 16 inches and approved for speeds of up to 210 km/h.
For transporters and vans. Efficiency and safety for daily use. Engineered in Germany, Continental offers premium tyres with optimum braking performance and safety. High level of efficiency thanks to higher mileage. Trusted by leading car manufacturers, including for example the vehicle models Fiat Ducato, Iveco Daily and Mercedes-Benz Sprinter.
Safe journey thanks to shorter braking distances on wet roads. New aqua grooves in the shoulder and sipes in the centre of the pattern create a windscreen wiper effect through the sipe edges. The result: vastly improved water dispersion for safe wet braking.
Safe handling in all situations, even under heavy loads. Thanks to the macro block tread pattern, there is improved contact with the road, and the pattern stabilisers increase the stability and rigidity of the tread pattern. The result: optimum driving performance.
Considerably reduced rolling resistance for lower fuel consumption and greater efficiency. A full silica compound with specially adapted polymers leads to reduced energy loss during the deformation of the tyre thanks to strong binding of the polymer chains to the silica. The effect: reduced rolling resistance for higher efficiency.
A winter tyre developed especially for transports and vans. The v-shaped tread of SL-6 tyres and the lamella with silicone additives improve handling when wet and on snow and ice.
Maximized block rigidity by applying the rib type for shoulder block, given the heavy load of commercial LT vehicles. Prevented stress between blocks by applying square-shaped dimple where a sipe is turned, resulting in better durability. Maintains optimal rigidity balance in the in-out section by applying half depth to the transverse groove in the center block. Improved hydro performance through drainage faster than the of existing zigzag type by applying the straight main groove.
Compound with excellent wear-resistance
Optimized dispersion of compound improves wear-resistance and reduces energy loss, which results in longer tread life.
Excellent even grip force leads to longer tread life
Sidewall protection from curb damage
4 side-wall shields provide outstanding resistance to damage such as external impacts and curb stones.
Improved fuel efficiency with decreased rolling resistance, thanks to the use of optimal compound.
Improved handling performance and excellent wet grip resulting in a 4% increase in braking performance over earlier models.
Com - for safe transport.
A reliable companion over both short and long distances, in all weather conditions and even with heavy loads. For vans and small commercial vehicles.
Improved handling under heavy loads.
The rigid tread pattern of the COM*SPEED ensures perfect handling characteristics even under heavy loads.
Increased mileage performance and highly economical.
The flat tire contour optimises the distribution of ground pressure. This keeps wear to a minimum and increases the mileage, economy and service life.
Reduced noise level.
The road noise from the tire is very quiet. The low noise level makes the ride more comfortable.
The CW-20 is a tyre designed especially for transporters and vans and features excellent efficiency and performance properties. It has a robust built and gives an impressive car-like driving comfort.
Optimal lateral grooves reduce the noise generated from air consonance and increases riding comfort.
Four-straight grooves ensure driving safety on wet ground.
Shoulder rigidity enhancement prevents from irregularly wearing and is suitable for long distance driving.
Sipes on the bottom of shoulder grooves keep tread soft and riding comfort in terminal wearing stage.
Double steel-belted construction for long lasting wear and uniformity.
Better Braking - 3D Block Design. 3D block design in the center delivers improved block stiffness for greater handling stability in high-speed driving and better snow braking.
Special Compound for Low Heat & Higher Abrasion Resistance. Molecular weight control and the application of a low hysteresis polymer and highly dispersed carbon block prevent the compound from heating up. Long service life with compounds that provide excellent wear resistance. Optimized rubber mixing to improve wear resistance.
Optimized Design for Enhanced Sidewall Stiffness. Sidewall protection solid is applied on four spots to extend service life with excellent durability against external impacts such as curbs.
As a winter tyre, the MA-W2 has all the advantages a modern tyre for light commercial vehicles needs.
A rubber compound specially designed for heightened traction
This tyre guarantees excellent grip even on snow and due to its special Silica Rubber ensures improved wet grip even at low temperatures. Furthermore, it also has the Snowflake symbols attesting to its qualities as a snow tyre.
For regional and long-distance transport. Matador brand with long tradition, wide portfolio and reliable performance. High mileage. Fits perfectly for example to Fiat Ducato, Iveco Daily and Ford Transit.
High mileage. The sturdy tread design and the flat tyre contour improve load carrying capacity and enlarge the abrasion volume. This leads to greater mileage and longer service life.
Increased driving stability even under heavy loads. Sturdy tread blocks and strong shoulder blocks increase driving stability. Handling remains safe even when transporting heavy loads.
Safe braking on wet roads. Three wide grooves running around the tyre, with special block edges and sipes, ensure the efficient displacement of water from the ground contact area, ensuring safe braking on roads. At the same time it offers good resistance to aquaplaning.
The mix makes the difference: the smooth riding fuel saver
Vanis 2 tires offer outstanding economy and safety reserves and superbly balanced properties on the road.
Safety: aquaplaning protection
Safety: dry braking
Cost-effectiveness: flat contour
Cost-effectiveness: scuff rib
Comfort: noise reduction
High level of safety thanks to short braking distances on dry surfaces.
Tie bars in the pattern centre and stable block type tread ensure optimised stiffness distribution in the pattern and increase the longitudinal stability in the blocks. This shortens braking distances on dry roads and increases safety.
Excellent price-performance ratio thanks to improved mileage.
The flat contour gives the Vanis 2 a large ground contact area which leads to a higher wear volume. In addition the low-wear compound increases the mileage and therefore the economy.
Increased driving comfort thanks to reduced noise level.
Noise breakers in the shoulder section reduce road noise and improve driving comfort.
A tire designed for high-speed stability and excelent traction performance. Its size range covers 80, 75, 70 and 65 series with speed rating of R, S and T. With new 3 main straight rib design and wide tread width, H 08 provides excellent handling capabilities on dry or wet conditions.